Sunday, February 25, 2018

Fire doors rating

Fire doors rating
Definition of a Fire Door - a door assembly, which is designed to hold back fire and smoke for a designated period and has been tested under conditions for door assemblies described in British Standard 476 Part 22; Fire Door Guidance -British Standard 8214-2008 (Code of Practice for Fire Door Assemblies).


Fire doors are made up of various components. The door itself is usually made from a solid timber frame, but they can sometimes be covered again in fire-resistant glass.

When I’m asked, “What is the required rating for a door in a particular wall?” nine times out of 10 my answer is, “It depends.” (This is the standard answer for nearly everything code-related.) In the Life Safety Code, required ratings for doors and other opening protective (e.g., windows) depend on the required hourly, fire-resistance rating of the barrier in which the opening is located and the function the barrier is serving.

Not all fire barriers are created equal. A door in an exit enclosure fire barrier will probably require a different rating than a door in a similarly rated corridor or hazardous area enclosure. Or a smoke barrier. Or a smoke partition. Or a shaft enclosure. (You get the idea.) At first glance it may seem convoluted, but the code does a good job of consolidating the opening protective rating requirements in one location. In the 2018 edition, you’ll find the required door rating in Table 8.3.3.2.2 (what I’ll refer to as “the table”). In the 2015 and earlier editions, the required ratings were located in Table 8.3.4.2. Prior to the 2003 edition, there was no handy consolidated table. If you’re using the 2000 or earlier edition, you’ll have to sort through a series of requirements and exceptions to determine the required door rating. (If you’re using the 2000 or earlier edition, you’re using a code that’s some 20 years out of date, and it might be time to join the rest of us in the 21st century. But I digress.)
To use the table, you’ll first need to establish the fire barrier’s purpose as required by the code. The table lists the purpose under the heading “Component.” Components include:
  • ·        Elevator hoistways
  • ·        Elevator lobbies
  • ·        Vertical shafts
  • ·        Horizontal exits
  • ·        Exit access corridors
  • ·        Other fire barriers
  • ·        Smoke barriers
  • ·        Smoke partitions

This is where the table has, at times, caused some confusion. Some have misinterpreted it as prescribing minimum fire-resistance ratings for various fire barriers. For example, the bottom row addresses smoke partitions. The second column specifies fire-resistance ratings for smoke partitions (half hour and one hour). Some have been led to believe that based on the table, all smoke partitions must have a minimum fire resistance rating of a half hour. This is not the case for smoke partitions or any of the other components listed in the table.
How can I find out more about an existing fire door?

Each fire door is labeled with a permanent label that must remain legible. Fire-rated frames may have a label or embossment from a listing agency. The door and frame labels contain a wealth of information, including the manufacturer, length of time the component is designed to resist fire, whether the opening is to be equipped with fire exit hardware, and whether the door carries a temperature rise rating or is a smoke door assembly.

Fire door labels usually include a number allowing manufacturers to access more information about the door’s original construction. Frame labels may state a fire resistance duration longer than that of the door. In this case, the assembly’s rating will be the lower of the two. Some hardware, such as fire exit hardware, will also be labeled, but the information on the label is typically less detailed.
The requirements for smoke partitions are located in Section 8.4; you’ll find no fire-resistance rating requirement there. Smoke partitions require a rating only where required by another section of the code. An example would be corridor walls in new, large, residential board-and-care occupancies, which require a half-hour rating (32.3.3.6.2). Once it’s determined that the smoke partition requires a fire-resistance rating, then refer to the table to determine the required fire-protection rating of any doors. In the case of a half-hour rated smoke partition, doors must have a one-third hour, or 20 minute, fire-protection rating. In short, use the table to determine the required opening protective rating when a barrier is required by another section of the code to have a fire-resistance rating.
Fire barriers having a one-hour rating might require one-hour doors, three-quarter-hour doors, or one-third-hour doors. Again, it depends on the barrier’s application. Fire barriers having a two-hour rating generally require one-and-a-half hour doors. Fire barriers with a rating exceeding two hours are rarely required by the code, except for a few occupancy separation fire barriers involving relatively hazardous occupancies.
I sometimes get the question, “Why does the code allow a 20-minute door in a one-hour barrier? Why not just require a one-hour door?” This would certainly make life easier when applying the code, but it also might require a more expensive door than is actually needed for life safety. Where the code requires 20-minute doors, it’s usually in a barrier that the committees primarily wanted to be smoke resistant. Before the days of smoke partitions, which first appeared in the 2000 edition, when a committee wanted a smoke resistant barrier (e.g., a corridor wall), it was simpler to mandate a one-hour barrier than to come up with criteria to evaluate smoke resistance. Since they really wanted a nominal degree of fire resistance, rather than mandating a substantial one-hour door, they were comfortable with a 20-minute door, which would inherently resist the passage of smoke.
Other reasons for the difference in fire barrier ratings and door ratings are the tests used to establish the ratings. You might have noticed I refer to the fire-resistance rating of a fire barrier, whereas a door has a fire-protection rating. Fire barrier assemblies are tested at a lab using a standard like ASTM E119, Standard Test Methods for Fire Tests of Building Construction and Materials, which yields a fire-resistance rating. Fire doors are tested using a standard like NFPA 252, Standard Methods of Fire Tests of Door Assemblies, which yields a fire-protection rating. Comparing the ratings from the different tests is not an apples-to-apples comparison. An hour’s worth of fire resistance (fire barrier) is not necessarily equivalent to an hour’s worth of fire protection (fire door).

And although it’s not a very scientific reason, this is the way the code has done it for many years and it seems to work. To this point, there has been no compelling reason to change the approach. If it’s not broken, there’s no need to fix it.


Remember Fire resisting glass can withstand exposure to the heat condition in a fire test for at least 60 minutes before it reaches a temperature high enough to soften it. This is mainly because, with clear FR glazing, nearly 50 per cent of the incident heat is transmitted through the glass by radiation.

Where can I find the code requirements for fire doors?

National Fire Protection Association (NFPA) 80, Standard for Fire Doors and Other Opening Protectives, is referenced by the International Building Code (IBC), International Fire Code (IFC), NFPA 101, Life Safety Code, and other codes and standards. NFPA 105, Standard for the Installation of Smoke Door Assemblies and Other Opening Protectives, addresses smoke doors and is also referenced in these publications.

Some fire door requirements are included within the applicable building or fire code, but NFPA 80 and 105 are referenced for many of the detailed requirements. For product-specific issues, the manufacturer’s listings must be referenced. For example, to find out the maximum fire door size available from a particular manufacturer,

The increased use of sprinklers has resulted in reduced requirements for temperature-rise doors. The 2012 IBC requires doors in interior exit stairways/ramps and exit passageways to have a maximum transmitted rise in temperature of 232 C (450 F) above ambient at the end of 30 minutes of exposure, but also includes an exception stating temperature-rise doors are not required in buildings equipped throughout with an automatic sprinkler system.

For the convenience of building occupants, how can fire doors be held open in a code-compliant manner?

Fire doors must be closed during a fire to compartmentalize the building and prevent the spread of smoke and flames. The intent is to protect the means of egress and allow building occupants time to evacuate safely. If fire doors are blocked or wedged open, they will not be able to do their job and protect the building and its occupants.


What is positive-latching, and is it required for all fire doors?

Hardware on fire door assemblies has to have an active latchbolt to prevent the pressure caused by a fire from pushing the door open and allowing smoke and flames to spread. A springlatch found in a standard lockset or latchset is considered an active latchbolt; some fire door configurations require a specific ‘latch throw’ (i.e. dimension of latch projection).

A deadbolt is not an active latchbolt, because it can be held retracted. An electromagnetic lock does not provide a positive latch, because there is no latching mechanism and the locking is accomplished when the electromagnet bonds to the steel armature. Electric strikes used on fire doors must be fail-secure—that is, when power is cut, the latch is securely captured behind the strike keeper. A fail-safe electric strike could allow the door to become unlatched, so such strikes may not be used on fire doors.
How is fire exit hardware different from panic hardware?

When panic hardware is used on fire doors, it must be fire exit hardware, which bears labels for both panic and fire resistance. A door with fire exit hardware will also have an additional label, indicating it is equipped with fire exit hardware. Fire exit hardware does not incorporate a mechanical dogging feature—the means to hold the latch retracted using a key, thumbturn, or Allen wrench. For fire doors where a ‘push/pull’ condition is desired, fire exit hardware with electric latch retraction may be used, as long as the latch projects automatically upon fire alarm, to secure the door.

Some vertical rod fire exit hardware for pairs of doors can be installed ‘less bottom rod’ (LBR). These devices use the top rod and latch only, with no bottom rod or latch. The advantage is there is no floor-mounted strike, and no bottom rod or latch to become damaged by carts or traffic. This configuration can sometimes cause a reduction in security, because it may be more easily defeated with only one latching point at the top of the door. In most cases, doors with LBR devices are required to have an auxiliary fire pin, which mounts in the edge of one door and projects into a hole in the edge of the other door if there is a fire.

Do fire doors need smoke gasketing? Are smoke doors also fire doors?

NFPA 80 and NFPA 105 do not specifically state fire doors and smoke doors require smoke gasketing. The key is to check the applicable code or standard, such as the International Building Code, for a limitation on air infiltration, typically a reference to UL 1784, Air Leakage Tests of Door Assemblies, as the test standard.


For fire doors and smoke doors in certain locations, the limit for air infiltration is 0.02 m3/(s • m2) or less as tested at a pressure of 0.02 kPa (3 cfm per square foot or less as tested at a pressure of 0.10 inch of water)—for most door sizes, this cannot be achieved without smoke gasketing. The requirements for smoke doors and fire doors depend on where they are used. For example, smoke barriers, smoke partitions, exit enclosures, and corridors all have varying requirements for smoke and fire resistance, and the applicable code sections must be consulted to see if a limit on air infiltration is established.

Thanks for reading, and as always, stay safe.

99 comments:

  1. Do not allow fire doors to be propped or wedged open at any time. If necessary certified products must be used such as certified holders/closers. Defective fire doors cost lives! Don’t delay.

    ReplyDelete


  2. Thank you for submitting this blog . this is very useful for us.
    In Pune there are so many firedoor manufacturers.
    go and visit best firedoor manufacturer near pune
    http://sunitiinternational.com/products/fire-rated-doors-manufacturer-in-india/


    fire door manufacturers in india,fire door manufacturer,fire door,fire doors in india,fire door manufacturer in india,fire doors suppliers in india,manufacturer of fire doors in india,fire exit door manufacturer exporters in india

    ReplyDelete
  3. check out this http://sunitiinternational.com

    fire door manufacturers in india,fire door manufacturer,fire door,fire doors in india,fire door manufacturer in india,fire doors suppliers in india,manufacturer of fire doors in india,fire exit door manufacturer exporters in india


    ReplyDelete
  4. check out this http://sunitiinternational.com

    fire door manufacturers in india,fire door manufacturer,fire door,fire doors in india,fire door manufacturer in india,fire doors suppliers in india,manufacturer of fire doors in india,fire exit door manufacturer exporters in india


    ReplyDelete
  5. That was a really Intresting post fire door manufacturers in hyderabadThanks for this well written post, i'll follow up for more updates if you keep posting them...

    ReplyDelete
  6. thanks for this kind of information. i also installed shopfronts in London for my shops in market and i think this is the best decision to enhance the beauty of my shop.

    ReplyDelete
  7. Thanks for posting such informative content! Very well explained in detail about the use and importance of the fire rated door! Vijay Systems Engineers also manufactures the best fire partition products! Keep posting!

    ReplyDelete
  8. Such a nice writing. The style you have narrated is simple beautiful and well authored. The quality of writing can be seen from the beginning until the end.

    Metal Fabrication Calgary

    ReplyDelete
  9. This comment has been removed by the author.

    ReplyDelete
  10. Very nice blog .Thanks for sharing good informative content for uPVC windows and doors.

    Soundproof uPVC windows cost in Cochin
    uPVC windows and Doors in Cochin Kerala

    ReplyDelete
  11. Thank You so Much For this amazing blog you have best of the best information i have want to read so click here Doors Manufacturers

    ReplyDelete
  12. Hey,

    Thanks for sharing such an wonder information about Lock Manufacturer. In the future, it will be constructive.

    ReplyDelete
  13. Amazing blog

    Wow! Great Fire Alarm System! I like the way you design it. But, I always recommend being precautioned as a Safety professional by learning all the fire safety skills from Fire safety courses in Chennai @Nationalsafetyschool.com. If you're interested in such kinda stuff, feel free to check out it. Thank you!

    NEBOSH Course in Chennai

    Fire and Safety Course in Chennai

    IOSH Course in Chennai

    ReplyDelete
  14. Great tips, many thanks for sharing. I have printed and will stick on the wall! I like this blog. curtain hardware manufacturers india

    ReplyDelete
  15. A fire door is a door with a fire-resistance used as part of a passive fire protection system to reduce the spread of fire and smoke between separate compartments of a structure and to enable safe egress from a building or structure or ship. You should go through Timex Plywood and Doors they are best door manufacturers. They have wide range of best quality door in unlimited finishes.

    ReplyDelete
  16. "Greetings! Very useful advice within this article! It is the little changes that will make the biggest changes. Many thanks for sharing!"
    Hotel Furniture Manufacturers in South Delhi
    Hotel Furniture Manufacturers in Delhi NCR

    ReplyDelete
  17. Check out our smoke detector price in karach and fire alarm system in Pakistancan that detects fire at an early stage. We are a safety solution provider for businesses

    ReplyDelete
  18. Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua
    Sliding doors london

    ReplyDelete
  19. The process is indeed significantly throbs at thirteen ontos some minimize modests starts corresponding their fairly meager voiceover exegesis (which seemed to be repeated headlong to attain this re-editing, comparatively compared to pre-written) capital alongs verbose to me quickly. fire door

    ReplyDelete
  20. Great post. Thanks for sharing. Very Useful advice with in this article!

    ReplyDelete
  21. This comment has been removed by the author.

    ReplyDelete
  22. This blog is a perfect is explaining the details of Fire rated doors. One such manufacturer of fire rated doors in India is TRIO INDIA. Situated is the industrial belt of Derabassi, Punjab, Trio India is one of the leading manufacturer of Quality Fire doors.

    You may check out the complete details of this Fire Door Manufacturer in India at www.trioindia.net

    ReplyDelete
  23. Nice information to share with us. Keep continuing..! We are also provides mesh doors and we are one of the best hardware shops in Hyderabad

    ReplyDelete
  24. This article is provide prefect information about Fire Door, We are Trio India we also manufacturer and supplier Fire door all over India, our manufacturer unite suitable in Dera bassi (Punjab) We also manufacturing clealroom dooraccessories .For more information visit: https://trioindia.net

    ReplyDelete
  25. Thank you for sharing this.
    Manufacturing High Quality Residential & Commercial Doors and Windows, well recognized & reputed by homeowners, renovators, architects and builders. Proudly Australian owned & operated for over 60 years.
    Aluminium windows

    ReplyDelete
  26. Nice blog . Keep sharing this useful information ! Do check this out
    Aluminum Doors Manufacturers in Noida

    ReplyDelete
  27. This type of door is made from two sheets of galvanized steel up to 0.8 mm thick with a core of honeycomb paper. This type of fire door resists smoke and high temperature of fire has been tested according to standard, withstanding time is 1 hour.
    Cua thep chong chay | Cua chong chay

    ReplyDelete
  28. 9.Nice Information, your blog is sharing unique information....
    Thanks for sharing!!!
    aluminum sash windows manufacturers

    ReplyDelete
  29. Thank you for sharing this.
    Manufacturing High Quality Residential & Commercial Doors and Windows, well recognized & reputed by homeowners, renovators, architects and builders. Proudly Australian owned & operated for over 60 years.Call us now at 9602 8773 for an obligation free Quote.
    Aluminium and glazing in Sydney

    ReplyDelete
  30. Thanks for the great post on your blog, it really gives me an insight on this topic.

    Mosquito net for doors

    ReplyDelete
  31. Aluminium Section Door Window Fabricator in ahmedabad
    Aluminium Section Partition in ahmedabad
    False Ceiling Work in ahmedabad
    Toughned Glass Door Partition Work in ahmedabad
    Aluminium Section Door Window Fabricator in ahmedabad is a relatively simple process that can even be conducted right from Brahmani Aluminium.Aluminium Section Door Window Fabricator in ahmedabad, Upvc Door Window Manufacture in ahmedabad, False Ceiling Work in ahmedabad, Aluminium Section Partition in ahmedabad.Brahmani Aluminium company is engaged in the manufacturing of False Ceiling that is manufactured using high-grade steel, glass, and plywood. Manufactured under the strict vigils of experts and professionals, the range of laminated kitchens offered by us is highly renowned among the client-base we have accomplished to gain. This offered kitchen is highly popular for its perfect finish. Toughned Glass Door Partition Work Glass Railing or tempered glass is a sort of laminated glass processed by controlled thermal or chemical treatments.

    ReplyDelete
  32. Nice Blog. Thanks for sharing this post with us. Find more information regarding roller shutter repair service in London.

    ReplyDelete
  33. False Ceiling Work in ahmedabad
    Aluminium Section Door Window Fabricator in ahmedabad
    Aluminium Section Door Window Fabricator in ahmedabad, Upvc Door Window Manufacture in ahmedabad, False Ceiling Work in ahmedabad, Aluminium Section Partition in ahmedabad . Our Brahmani Aluminium company is popular in manufacturing Aluminum False Ceiling System to our clients. When it comes to the ceiling that is strong and durable, dimensionally stable, and aesthetically appealing. The aluminium company False Ceiling Products has hues requirement in architectures, it used in restaurants, offices, commercial & residential areas, canteens, etc we deal in all types of Aluminum ceiling lay-in panels.

    ReplyDelete

  34. Your blog is very nice thank you for this wonderful information i like very much for this article. and it will give the more information from this blog.

    Industrial Sliding Door in Chennai

    ReplyDelete
  35. I am really impressed with your blog article, such great & useful knowledge you mentioned here.Your post is very informative. I have read all your posts and all are very informative. Thanks for sharing and keep it up like this.
    fire extinguisher refill manufacturer in Maharashtra

    ReplyDelete
  36. Cool….i just love learning new things, thanks for the good instruction that i have found here.
    Fire Resistant Doors dealers

    ReplyDelete
  37. This post is extremely radiant. I extremely like this post. It is outstanding among other posts that I’ve read in quite a while. Much obliged for this better than the average post. I truly value it! fire rated doors price in uae

    ReplyDelete


  38. GARG LOCKS is a Best Door Hinges Manufacturers Company in India. There are ten finishes in which the handle is available. It is made out of solid Steel which keeps it away from rusting and makes it last for long years. And also Stainless Steel Handles Available for Best Price.

    ReplyDelete
  39. This Post is Extremely good
    https://futoria.in/

    ReplyDelete
  40. I found your blog post to be well-written, engaging, and informative. Thanks for sharing your thoughts and insights on this important topic! If anyone is looking for Mortise Lock Manufacturers in India then do visit acmeexports.com

    ReplyDelete
  41. I had been looking for a laptop repair business for a while, but I have a great selection of laptop repairs in this post. I appreciate you very lot for doing this.
    Call 045864033 or visit the Dubai watch repair service centerlaptop repair service centre to receive service if you need laptop repair in Dubai.watch repair service center

    ReplyDelete
  42. This is a great website to visit. I recently came across your blog's content and wanted to let you know that I have been enjoying the blog entries. I'll be a frequent visitor absolutely certain.
    plumber dubai

    ReplyDelete
  43. Hey friend, it is a very well-written article, thank you for the valuable and useful information you provide in this post. Keep up the good work!
    Your Backyard Lifestyles

    ReplyDelete
  44. Nice blog! Being one of the best custom home windows and doors manufacturers in Melbourne, we offer a variety of services like manufacturing, supplying and installing. Every window and door we create starts with an aim to serve you with the best.

    ReplyDelete
  45. I recently came across your blog and have been reading along. Excellent work. Vacuum Insulated Glass

    ReplyDelete
  46. The Phoenix Industry is one of the leading PVC and PU Conveyor Belt Manufacturers. We are one of the retailers and Suppliers for a wide range of best quality PVC Conveyor Belts in India, suited to various manufacturing industries. We use the best quality raw materials to manufacture our Belts. Our products are considered very much reliable and have exceptional usage properties.

    ReplyDelete
  47. I really liked you content, Hope you will share more blog like this. With a focus on durability, functionality, and innovative designs, Daya Sons is a reliable choice for customers looking for top-tier kitchen sink options in the market.
    visit here for more >>
    kitchen sink manufacturers
    kitchen sink manufacturers in India
    kitchen sink suppliers

    ReplyDelete
  48. I really liked you content, Hope you will share more blog like this. With a focus on durability, functionality, and innovative designs, Daya Sons is a reliable choice for customers looking for top-tier kitchen sink options in the market.
    visit here for more >>
    kitchen sink manufacturers
    kitchen sink manufacturers in India
    kitchen sink suppliers

    ReplyDelete