Response Indicator
The unit is designed to ensure that Alarm
Signal can be actually transmitted to all locations. It is directly controlled
with the relative detector, transmitting the fire alarm signal to the
conspicuous place so that people can find the alarming detector easily. It is
suitable for detectors installed in residential department, dangerous area,
under false floor or above false ceiling.
According To NFPA 72 -
2019 (National Fire Alarm and Signalling Code)
Chapter 17 Initiating Devices; 17.4 General Requirements.
Chapter 17 Initiating Devices; 17.4 General Requirements.
Tentative Technical specification of Response indicator:
Operating Voltage
|
2.0VDC ~ 5.0VDC
|
Operating Current
|
Standby current : 0mA
Action current ≤30mA
|
Indicator
|
Red. It turns off when
monitoring normally, but constantly illuminates in action.
|
Operating Temperature
|
-10°C ~ +55°C
|
Relative Humidity
|
≤95%, non-condensing
|
Material of Enclosure
|
ABS / MS, White / Red
|
Dimension (L×W×H)
|
64.5mm×64.5mm×31.4mm
|
Below snap for connection diagram with Response Indicator & Detector.
