Friday, April 15, 2022

Find a Qualified Fire Alarm Service Company

Find a Qualified Fire Alarm Service Company 

Maintaining your fire alarm system in good working order ready to perform in time of emergency is a matter of building safety, and even life and death.  Your fire detection and early warning system should be a top priority of building owners, and factored into regular maintenance intervals as deemed necessary by a fire systems specialist.

There are many components involved with fire safety systems, including electrical components, wiring and cables, wireless technology, smart sensors, computerized control panels, fire suppression systems, audible and visual alert devices, all of which must work in conjunction with each other and at times with auxiliary equipment such as PA System, HVAC systems etc. Remember we are discussed about Addressable panel only, conventional Fire panel is just plug & play. No need such criteria for service vendor.

Components of fire and safety systems today are technologically sophisticated, sensitive pieces of equipment that require regular inspections, testing. Maintaining a periodic inspection and testing schedule as deemed necessary by a professional fire and safety specialty firm is the best way to ensure optimum working performance of your system, and avoid costly fire system repairs. Also you need to know about your installed fire panel is easy for program or need special tools, like: software or dongle etc.

Maintenance Can Prevent Costly Fire System Repairs

Many things can go wrong with the sophisticated equipment used for fire, smoke and gas detection and early warning systems.  Electrical equipment can be sensitive to dust, dirt and debris, which can cause performance issues or left to accumulate can cause a system failure resulting in needed replacement parts. We suggest do not repair only replace. Look your Fire System either UL listed, EN listed or VDS. When you involve local repairing company they used non listed component and as a result you panel or fire component start abnormal current flow. Internal software can not recognised that electron flow and start misbehave.

The environment that your fire and safety system is installed in will have an impact on the life and performance of your system.  The National Fire Protection Association (NFPA) Guidelines detail recommended testing and inspection requirements in NFPA 72, which are the minimum requirements for compliance in most jurisdictions. Depending upon your environment, you may need a more comprehensive inspection and testing schedule to keep your system clean and operable.

The age of your fire detection system is an important consideration, as older equipment will begin to have part and component failure, and may eventually need to be replaced. If the proper maintenance is performed on a regular basis since installation, it could prolong the life of your system. Provide to your service provider all required drawings, Password, software database, work permit and 1st time stay with them and observe there activity. Keep detailed records of all fire and safety system maintenance and inspections with your fire system manual, as this may be helpful to the technician performing repairs.

Only licensed technicians should perform work on your fire and safety detection and warning system, as these are highly sophisticated electrical components that correspond with other parts and auxiliary equipment, and should be tested with a rigorous and thorough checklist. Before involving a fire service provider you need to check. Do not involve person who don’t know and hire someone for execute service support.

1.   Industry involvement (Like: Member of CFSA, NFPA, ASIS, NSC, FSAI)

2.   Past similar work experience with Performance letter.

3.   Team person / Engineer product technical certification, if product brand are Edwards, Notifier, ESSER, Autronica, Mircom, Simplex, Schreck etc OEM certification is must. Past performance Letter also create value.

4.   Person from company should know or certified from NFPA on NFPA 72. Also know about local code standard.

5.   Some case OEM authorization (GST, Apollo, Morley etc) also create value.

High Rise Security Systems uses only licensed and field trained technicians, adhering to all NFPA guidelines with complete system design, maintenance, inspection and testing and fire system repairs. As a customer you must collect soft copy of Fire Panel database from your fire service provider along with service report in detail. If you confuse contact us today to speak with one of our highly skilled fire and safety consultants. Write us ssaintegrate@gmail.com


3 comments:

  1. This comment has been removed by the author.

    ReplyDelete
  2. Thanks for sharing this useful information via this blog with us. Paraflex is a leading House Wire Manufacturers in Gujarat providing a wide range of products available for each customer's needs.

    House Wire Manufacturers in Gujarat

    ReplyDelete
  3. For were fire alarm licence.

    ReplyDelete