HyperTerminal Settings For Fire Alarm Control Panels

HyperTerminal Settings For Fire Alarm Control Panels

Hyperterminal is a great way to connect to a fire alarm control panel(FACP).  It is also the preferred method to achieving a fire alarm control panels device parameters f you cannot access the program.  Simply connect your laptop to the fire alarm control panel with the appropriate cable and enter the correct values for HyperTerminal.  Once in, your laptop will mimic the FACPs screen or display.  From here you can capture the text file making it easy to store fire alarm testing reports and device parameters.

Here is a little trick if you need to know exactly what devices are on each loop.  While connected with Hyperterminal, pull off each SLC circuit one at a time.  Your laptop screen will then start to display every device on that loop as they go into trouble due to the lack of communication with the FACP loop card.  Capture the text file and your done.  You now have a simple starting plan to re-write a program if necessary.

Below are some of the HyperTerminal settings I have come across:

Notifier Fire Warden Series FACP: Includes NFW2-50 and NFW2-100

1.           Start HyperTerminal from its Start Menu icon.

2.           Give the connection a name (for example, Fire Warden) and select any icon that you’d like. Click OK to continue.

3.           In the “Connect Using” section, select the appropriate COM port that you’d like to use to communicate with the panel. Click OK after the selection has been made.

4.           Set your parameters as follows:

·                  Bits per second: 19200

·                  Data bits: 7

·                  Parity: Even

·                  Stop bits: 1

·                  Flow Control: None

5.           Click OK.

6.            You are now connected to the panel.

Fire-Lite Series FACP: Includes MS-9200, MS-9600, MS-9200UDLS, MS-9600UDLS

1.           Start HyperTerminal from its Start Menu icon.

2.           Give the connection a name (for example, Fire-Lite) and select any icon that you’d like. Click OK to continue.

3.           In the “Connect Using” section, select the appropriate COM port that you’d like to use to communicate with the panel. Click OK after the selection has been made.

4.           Set your parameters as follows:

·                  Bits per second: 19200

·                  Data bits: 7

·                  Parity: Even

·                  Stop bits: 1

·                  Flow Control: None

5.           Click OK.

6.           You are now connected to the panel.

Gamewell 600 Series FACP: Includes the IF610, IF602, IF650, IF630

1.           Start HyperTerminal from its Start Menu icon.

2.           Give the connection a name (for example, 600) and select any icon that you’d like. Click OK to continue.

3.           In the “Connect Using” section, select the appropriate COM port that you’d like to use to communicate with the panel. Click OK after the selection has been made.

4.           Set your parameters as follows:

·                  Bits per second: 2400

·                  Data bits: 8

·                  Parity: None

·                  Stop bits: 1

·                  Flow Control: Xon / Xoff

5.           Click OK.

6.           Select the pull down file menu at the top of the screen

7.           Select properties

8.           Select settings tab

9.           Set emulation to VT-100

10.        Select ASCII setup

11.        Change the line display setting to 1 milliseconds

12.        Change character display setting to 100 milliseconds

13.        Click OK twice

14.         You are now connected to the panel.

FCI E3 Series FACP:

1.           Start HyperTerminal from its Start Menu icon.

2.           Give the connection a name (for example, E3) and select any icon that you’d like. Click OK to continue.

3.           In the “Connect Using” section, select the appropriate COM port that you’d like to use to communicate with the panel. Click OK after the selection has been made.

4.           Set your parameters as follows:

·                  Bits per second: 115200

·                  Data bits: 8

·                  Parity: None

·                  Stop bits: 1

·                  Flow Control: None

5.           Click OK.

·                  You are now connected to the panel.

FCI 7100 Series FACP:

1.           Start HyperTerminal from its Start Menu icon.

2.           Give the connection a name (for example, 7100) and select any icon that you’d like. Click OK to continue.

3.           In the “Connect Using” section, select the appropriate COM port that you’d like to use to communicate with the panel. Click OK after the selection has been made.

4.           Set your parameters as follows:

·                  Bits per second: 9600

·                  Data bits: 8

·                  Parity: None

·                  Stop bits: 1

·                  Flow Control: None

5.           Click OK.

7.           You are now connected to the panel.

FCI 7200 Series FACP:

1.           Start HyperTerminal from its Start Menu icon.

2.           Give the connection a name (for example, 7200) and select any icon that you’d like. Click OK to continue.

3.           In the “Connect Using” section, select the appropriate COM port that you’d like to use to communicate with the panel. Click OK after the selection has been made.

4.           Set your parameters as follows:

·                  Bits per second: 1200

·                  Data bits: Leave Default

·                  Parity: Leave Default

·                  Stop bits: Leave Default

·                  Flow Control: None

5.           Click OK.

6.           You are now connected to the panel.

Difference between XLPE and PVC Cables

Difference between XLPE and PVC Cables

XLPE - is cross linked polyethylene cable. 

Main Thumb rule for differentiation is that XLPE cables can be used for both HT and LT lines.
But PVC Cables can be used only for LT lines.

XLPE can withstand a higher temperature than PVC without detriment. This means that more current can be conducted for the same cross sectional area of copper. This means a big saving in cables costs. 

XLPE Cables useful properties are:-

1. Temperature resistance
2. Stress rupture resistance
3. Environmental stress crack resistance
4. Resistance to U.V light
5. Chemical resistance
6. Oxidation resistance

XLPE Cables can be useful for following applications:-

1) XLPE cables work for the working voltage of 240 V to 500 KV .
2) Conductor Material can be either Copper or Aluminum.
3) XLPE cables can be either Single Core cables or Multi core cables depending upon the number of
cores.
4) They can be Unarmoured or Strip Armoured or Wire Armoured or Tape Armoured type depending upon the presence or absence of Armour.
5) HT / LT Aerial Bunched Cables


Polyvinyl chloride Cables useful properties are :-

They are commonly abbreviated as PVC, insulated cables are widely used in various fields.
PVC's Cables are generally have following Properties:-
1. Low cost
2. Chemical resistance
3. High tensile strength
4. Better flexibility

For, electric cables the PVC is mixed up with plasticizers.
Low voltage copper conductor PVC cables are extensively used for domestic home appliances wiring, house wiring and internal wiring for lighting circuits in factories, power supply for office automation, in control.
PVC CABLES
1) Power Cables upto 1.1 KV
2) Multicore Cables upto 61 Cores
3) Sheilded instrumentation Cables
4) FRLS / FR / HR / Fire Survival Cable 

-> Electrical, mechanical, weather ability contrast table:

Properties	XLPE	PVC
1. Chemical Structure	Thermoset, pure Hydrocarbon. Non-Polar C-C or Si-o-Bonds	Thermoplastic Polar Rotosenated. C. Ci. Bond
2. Polymer Structure	Partial Crystalline	Amorphous
3. Long-term Working Temperature	90℃	70℃
4. Emergency overload	130℃	90℃
5. Highest working temperature of short circuit	250℃	160℃
6. Carrying capacity(A)	1.25a	1a
7. Dielectric constant(20℃,60Hz)	2.3	8
8. Cable Installation Job	Easy due to less Wt, less Diam and Less Bending radius.	Not Easy Like XLPE
9. Service life (year)	30	20
10. Cable diameter	0.92D	D
11. Volume resistivity(Ω·m)	1016~1018	1010-1013
12. Tensile strength(Mpa)	23	20
13. Thermal Resistivity   (Deg C/cm/watt)	7.4	730
14. Thermal conductivity(W/m·K)	0.48	0.15
15. Dielectric loss tangent (20℃,60Hz)	0.0002-0.0003	0.04-0.12
16. Elongation (%)	450-600	100-400
17. The breakdown field strength (MV/m)	35-50	20-35
18.Power Factor at 20DegC X1013	-90	80
19. Low Temperature   Brittleness Deg. C	Excellent	-15
20. Moisture Penetration   Resistance	Excellent	Good
21. Water quantity (%)	<0.01	0.8
22. Oxygen index	18	30
23. Toxicity index	1.77	15.01
24. Brittleness temperature℃	-60	-40
25. Softening temperature℃	120	120
26. Resistance to acid and alkali, and climate	best	good ~ best
27. Whether containing halogen	do not contain	containing
28. Moisture Penetration   Resistance	Excellent	Good
29. Oil Resistance	Excellent	Fair
30. Solvent Resistance	Excellent	Poor
31. Acid Resistance	Excellent	Fair
32. Alkali Resistance	Excellent	Good
33. Standard	BS 5467	BS 6346

-> Toxicity index comparison table:

Gas	Gas concentration CQ(ppm)		Dangerous concentrations CQ (ppm)
	Polyvinyl chloride (PVC)	Crosslinked polyethylene (XLPE)
CO	5525	1971	4000
CO2	46300	125400	100000
HCL	6173	0	500
NO2	1.5	3.6	250
SO2	3.25	1.8	400
Toxicity index	15.01	1.77

Summary: cross linked polyethylene insulation cable in the electrical performance, heat resistance, physical and mechanical properties, resistance to climate and toxicity are better than PVC insulated cable.

Reasons Why XLPE is Popular
Here are five reasons why XLPE are popular than standard wires available in the market.

1. Excellent Mechanical and Physical Properties: XLPE has high thermal resistance and higher melting point than most standard cables found in the market. These cables possess low tan delta, high initial dielectric strength, low dielectric strength, and improved mechanical properties at high temperature. Also, XLPE resists moisture, UV light, oxidation, environmental stress, stress cracking, and rupture.
2. Lightweight: The XLPE wire is lighter than other standard wires with a paper or lead insulation. That’s why it is more convenient to install and transport. XLPE wires are largely used in the construction industry because they reduce transportation and installation costs.
3. Easy to Maintain: XLPE wires require lesser maintenance, when compared to other standard cables. Also, they have easy jointing and termination procedures.
4. Used for HT and LT Lines: XLPE wires can be used for both HT and LT lines.
5. Flexibility: XLPE wires have multiple cores, which makes them highly flexible. This added flexibility contributes to smaller bending radius as well.

Recently XLVLDPE (Cross Linked Very Low Density Polyethylene) wires have been introduced to the market.  These wires have enhanced physical and mechanical properties than regular XLPE wires. The above-mentioned factors and XLVLPDE wires depict the rising popularity of XLPE wires in the market.